Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Cleveland Homeowners
Cleveland chimneys take a beating. Freeze-thaw cycles crack mortar, summer storms drive water past worn flashing, and older flues lining the city’s housing stock were never built to vent a modern fire. When you can smell smoke in the attic, see a stain spreading on the ceiling near the chase, or watch a crown crumble from the driveway, the problem has usually been building for more than a season.
We handle chimney repair in Cleveland as a single accountable specialist. Our technicians have up to experience, and we inspect, sweep, and repair rather than hand you off to another trade. Nothing gets recommended without camera evidence you can look at yourself. Call (844) 962-2617. We answer 24/7. Fast dispatch from 7am to 7pm.
Key Takeaways
- One specialist for inspection, sweep, and repair – no referrals in the middle of a job.
- Every recommendation backed by camera footage and photos you can see.
- Professional-grade materials from Shoreline Chimney Sweep‘s confirmed supply roster, not commodity hardware-store parts.
Chimney Cap Installation
Chimney Cap Installation is the step that keeps rain, animals, and debris out of a flue that’s otherwise sound. A proper cap is a stainless or copper lid on a mesh or louvered body, sized to the flue and anchored to the crown or the flue tile itself. You need one if the chimney is uncapped, if a squirrel or bird has moved in, or if rain is running straight down the flue and rusting out a damper. We fit caps from Famco and Olympia Chimney and seal the base so water can’t track under the rim. Most cap installations in Cleveland run $250 to $550 depending on flue count, cap style, and how much anchor work the crown needs.
Single-Flue and Multi-Flue Caps
A single-flue cap is the straightforward job. Multi-flue chimneys need a cap wide enough to cover every flue with proper clearance, and that’s where sizing mistakes show up fast. We measure the actual flue tiles rather than guessing from the roofline.
Animal Guards and Spark Screens
Mesh size matters more than most homeowners realize: too coarse and starlings get through, too fine and creosote clogs it. We match the screen to what you burn and how often. A clogged screen restricts draft, which is its own problem.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement
Chimney Cap Replacement is what a failed or missing cap needs once the old one has rusted through, blown loose, or dented under a fallen branch. Caps fail faster than people expect because they sit in the worst weather on the house. Replace yours when the mesh is torn, the base seal has pulled away, the cap sits crooked after wind, or water is getting past it into the flue. We pull the old cap, inspect the flue tile and crown underneath, and set a new cap anchored properly rather than screwed into crumbling mortar. Replacement typically runs $275 to $600 in Cleveland, and the written estimate sets the final price. If the flue tile is also spalling, we’ll show you that before quoting anything more.
When a Repair Beats a Replacement
A cap with a bent corner or a loose anchor bolt can often be reset and resealed. We won’t sell a full replacement when the existing cap has years left in it, and we’ll tell you plainly.
Choosing the Right Material
Stainless holds up best against the moisture and temperature swings here. Copper is a long-lived option with a different look. We’ll walk through both without upselling.
Chimney Liner Installation
Chimney Liner Installation gives a flue a continuous, correctly sized stainless liner from the top of the chimney down to the appliance connection. You need one when the original clay tiles are cracked or missing, when an unlined flue is serving a wood stove or insert, or when a previous liner has failed. We install DuraFlex flexible liner systems, which handle offsets and the slight bends older Cleveland chimneys often have. This is genuinely dangerous territory: a cracked flue lets heat and carbon monoxide reach framing and living space, so it’s not a job for a general handyman with a brush. Liner installation generally runs $2,200 to $4,800 depending on height, flue diameter, insulation, and whether a stove connection is involved. Call (844) 962-2617 for an exact quote – estimates are free.
Restoration Instead of Full Relining
Not every damaged flue needs a new liner. Where the tiles are intact enough, HeatShield restoration can often rebuild the flue surface from the inside without tearing out masonry. We’re trained on the HeatShield system and will tell you when restoration is the right call and when it isn’t.
Insulation and Draft
An insulated liner keeps flue gases hot, which cuts creosote buildup and improves draft on a cold chimney. It matters more in Cleveland’s winters. We’ll explain the tradeoff before you decide.
Chimney Flashing Repair
Chimney Flashing Repair addresses the metal and sealant that bridge the gap between your chimney and the roof – the detail most likely to leak on any house. Flashing fails when the step flashing lifts, the counter-flashing pulls from the masonry, or old tar patches crack and let water in at the roof line. You need flashing repair when you see a ceiling stain near the chimney, water in the firebox after rain, or rust streaks down the chase. We reset and replace flashing with proper step and counter-flashing, then seal the masonry joint correctly. Flashing repair in Cleveland usually runs $400 to $900 depending on roof pitch and how much of the existing flashing can be saved. Water damage spreads quietly, so it’s worth catching early.
Why Tar Patches Fail
Roof cement over old flashing is a short-term fix that cracks within a couple of seasons. It hides the problem rather than solving it. We remove it and rebuild the detail properly.
Finding the Actual Leak
Water travels, so a stain in the attic isn’t always directly under the chimney. We trace the source rather than guessing, and we show you where it’s coming in before quoting.
Chimney Crown Repair
Chimney Crown Repair fixes the concrete top that slopes water away from the flue tiles – and when it fails, everything below it suffers. Crowns crack from freeze-thaw movement, from settling, and from original construction done thin. Repair is needed when you see cracks wider than a hairline, a crown that’s pitted and flaking, or water running down the outside of the flue tiles instead of off the top. We rebuild or resurface crowns with proper slope and a flexible seal at the flue joint. Crown work in Cleveland typically runs $600 to $1,500 depending on size and whether the crown gets a full rebuild or a resurfacing. A failed crown lets water in every rain, which shortens the life of the liner and the masonry below.
Rebuild Versus Resurfacing
A crown with structural cracks needs a rebuild. A crown that’s sound but surface-worn can often be resurfaced. We’ll show you the difference on your own chimney.
The Flue Joint Seal
Most crown leaks start at the seam where the crown meets the flue tile. A flexible sealant there absorbs movement instead of cracking. It’s a small detail with outsized effect.
Chimney Repair Companies
Chimney Repair Companies vary a lot in what they can actually finish, and that gap is where homeowners get stuck. Some sweep crews find a cracked crown or a failed liner and then refer you out, which means a second contractor, a second diagnosis, and a second bill. Others are generalists who touch chimneys between roofing and gutters. We’re a dedicated chimney specialist – inspect, clean, and repair handled start to finish, with no referrals and no gaps. Our technicians have up to experience, and our work draws on a professional supply roster including Gelco, Olympia Chimney, Famco, and Copperfield. Typical repair pricing in Cleveland ranges from about $275 for a cap replacement up to $4,800 for a complete reline, and the written estimate sets the final price.
Questions Worth Asking Before You Hire
Ask whether the company can perform the repair it’s recommending, or only diagnose it. Ask to see photos of the problem. A specialist will show you the actual condition rather than describe it vaguely.
Materials Tell You Something
A crew working with named professional brands on every job is usually a crew that plans to stand behind the work. Commodity parts from a hardware store won’t hold up here.
Chimney Masonry Repair
Chimney Masonry Repair addresses the brick, mortar, and structural elements of the chimney itself – not just what’s inside the flue. Tuckpointing, brick replacement, and rebuilding the above-roof section fall under this work, and Cleveland’s freeze-thaw pattern drives most of it. Masonry repair is due when mortar joints raze out, bricks spall or flake, or a chimney leans or shows a visible crack through courses. We repoint with mortar matched to the existing brick, replace spalled units, and rebuild sections that have lost structural integrity. Masonry repair in Cleveland generally runs $800 to $3,500 depending on the extent of the rebuild and the height of the chimney. Left alone, failing masonry can compromise the whole chimney structure.
Matching Mortar to Old Brick
Hard modern mortar against soft old brick causes spalling as the brick gives way first. Matching the mix to the original is the difference between a repair that lasts and one that accelerates decay.
When a Rebuild Is Necessary
If the chimney is leaning or has lost more than a portion of its above-roof bricks, repointing isn’t enough. We’ll explain where the line is and why, using your own photos.
Brands We Service
We work with DuraFlex flexible liner systems and know where they wear at the appliance connection and at the top plate after years of heat cycling. HeatShield restoration materials are a core part of our repair work, and we’re trained on the system – which means we can often restore a flue without a full rebuild. We install and service Gelco and Olympia Chimney components, and we fit Famco and Copperfield caps and accessories as part of a complete repair.
Each of these brands earns its place on a chimney because it holds up to weather and heat over time. Whether you have DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, Copperfield, or any other make, we can help. We don’t claim to be a dealer for any of them – we’re the crew that installs and repairs properly and stands behind the work.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Water staining on the ceiling or near the chase. A stain that grows after rain usually points to flashing or crown failure. Water spreads into framing fast, so it’s worth diagnosing early rather than painting over.
- Smoke backing into the room. A weak or blocked draft can mean a damaged flue or a clogged cap screen. It’s a safety issue as much as a comfort one.
- Crumbling mortar or flaking brick. Spalling brick and raked-out joints mean moisture is already inside the masonry. Catching it before a rebuild saves real money.
- A cracked or missing crown. Every rain drives water down the flue tiles when the crown has failed. The longer it runs, the more of the chimney below is affected.
- Rust on the damper or firebox. Rust means water is getting in from above, likely past a failed cap or flashing. It’s worth a look even if the fire still lights fine.
Our Process, Step by Step
- 1
Book the visit. We schedule a time that works and confirm what the visit will cover. No surprise add-ons at the door.
- 2
Camera inspection. We run a camera down the flue and photograph the crown, flashing, cap, and firebox. You see the footage before anything is recommended.
- 3
Written diagnosis. You get a plain explanation of what’s wrong, what’s urgent, and what can safely wait. We don’t recommend work we can’t show you evidence for.
- 4
Written estimate. The estimate sets the price per job, with materials named. No service-call fees. The written estimate is the final price.
- 5
Repair and report. We perform the repair with professional-grade materials and leave you with before-and-after photos. If a second visit is needed, you’ll know why.
How Much Does Chimney Repair Cost in Cleveland?
Chimney repair in Cleveland typically runs $275 to $4,800 depending on what’s actually wrong. A typical cap replacement runs $275-$600. Flashing repair generally runs $400-$900. Crown repair falls between $600 and $1,500. Masonry repointing or partial rebuild runs $800-$3,500. A full liner installation runs $2,200-$4,800.
What affects the price: chimney height and roof pitch, how many flues are involved, whether the damage is surface-level or structural, and which materials the job requires. A rebuild of an above-roof section costs more than repointing the same chimney. Insulating a liner adds cost but lengthens its life.
To avoid overpaying, get the diagnosis in writing and ask to see the camera footage. Any company that recommends a liner or masonry work without visual evidence is asking you to take it on faith. We show you the footage before quoting anything. If work can safely wait until spring, we say so.
What’s included in a free estimate: inspection findings, photos and footage, a written scope of work, and a named price. Call (844) 962-2617 for an exact quote – estimates are free.
Our Service Area Near Cleveland
We serve Cleveland and the surrounding communities, including Brooklyn, Garfield Heights, Lakewood, East Cleveland, Cleveland Heights, Shaker Heights, Seven Hills, Parma, and University Heights. Scheduling is straightforward: we book a visit and confirm before we come. For chimney repair in Brooklyn or chimney repair in Garfield Heights, the process is the same – camera inspection, written diagnosis, written estimate, and repair handled by one specialist. Call (844) 962-2617 to book.
Serving Cleveland, OH – Our Local Coverage Area
We serve Cleveland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Repair in Cleveland
Chimney repair covers the structural and functional fixes that keep a chimney safe and drafting properly – cap, flashing, crown, liner, and masonry work. It’s different from a sweep, which removes creosote and debris. Repairs address what’s damaged; a sweep keeps it from damaging again.
Most single-item repairs – a cap replacement or flashing fix – take a few hours. Crown repair and masonry work usually take a day. A full liner installation takes longer, depending on chimney height and whether a stove connection is involved. We give you a time estimate with the written quote.
Typical ranges are $275-$600 for cap replacement, $600-$1,500 for crown repair, $800-$3,500 for masonry work, and $2,200-$4,800 for liner installation. The written estimate sets the final price. Call (844) 962-2617 for an exact quote – estimates are free.
Yes – we install DuraFlex flexible liner systems and service existing installations. We also work with HeatShield restoration, Gelco, Olympia Chimney, Famco, and Copperfield. Whether you have DuraFlex or any other make, we can help.
Same-day repair is often possible. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (844) 962-2617 to check availability.
We stand behind our repair work with a satisfaction guarantee, and the details of coverage are included in your written estimate. Ask about it when you book. We don’t leave the interpretation of the warranty to you.
Clear access to the fireplace and the path to the roof if possible, and move anything breakable away from the hearth. If you have a wood stove, let us know the model so we bring the right fittings. Nothing else is required – we bring the inspection equipment and materials.
Schedule Your Chimney Repair Service in Cleveland Today
A cracked crown, a failed cap, or a damaged liner only gets worse with each freeze and thaw. Call us at (844) 962-2617 to book a chimney repair visit in Cleveland. We answer 24/7. You’ll get a real diagnosis with camera footage you can see, a written estimate with no service-call fee, and repair handled by one specialist from inspection through completion. Estimates are free and no-obligation.
Written by the team at Shoreline Chimney Sweep.